Shaanxi Lingyun Group Co. Ltd

Model Number: JS1000, JS series-#6114 Brand Name: jianxin machinery Key Specifications/Special Features: DescriptionJS seriesconcrete mixer machine for saleis rational in overall design, optimized in performance and convenient for operation and maintenance. It is suitable for all kinds of large, medium and small factories of prefabricated parts as well as industrial and civil construction units to mix all kinds of mortar and dry concrete, plastic concrete, fluid concrete and lightweight aggregate concrete.1. Shaft end sealing adopts pressure difference and multi-heterodyne sealing technology to extend shaft end's service life.2. National patented taper mixing arm which can easily disassembled.3. National patented monitoring system to control every part of mixer, such as hydraulic pump,gearbox's oil temperature,oillevel, whichhelps user see its condition directly and clearly. In this way, the machine's service lifecan be extended substantially.4. Advanced hydraulic pressure system isadopted to open and close the discharging door. Under the situation of sudden power failure, the manual pump can be used to open the discharging valve for emergency discharge to avoid agglomeration.5. Lubrication system to make the mixer service a long life.6. Security protection device to keep the safety of maintenance stuff.7. Water spraying by multiple tube and circuit system.Working principles
(1) Concrete mixer during operation to check at any time to listen to the motor reducer, transmission gear is normal.
(2) To touch or test temperature bearings and the motor is too high. View reducer whether there leakage.
(3) Pay attention to the mixing device is functioning properly, and the blade cannot shovel piece loose.
(4) Concrete mixer water system shall be able to work effectively, the occurrence of leakage cannot, or cannot control the amount of water.
(5) Check the discharge port of the switch device is working, if not working properly should immediately carry out maintenance.

Advantages
(1) The whole mixing process is mild, make sure no material breaks. Mixing quick, just need 2-3 minutes.
(2) Even mixing and large adjustable loading range.
(3) Large discharging door make the discharging speed quick, and no remains.
(4) Structure compaction, pleasing appearance, stable property, low noise, no environment pollution.
(5) Air seal main shaft, reduces the friction between main shaft and material, and increase operating life.
(6) Low energy consumption, only need 1/4 of general mixer.
(7) The concrete mixer price is very cheap and with good quality.

Maintenance
1. Correct movement and transport from the design perspective, concrete mixer dragged move only suitable for short-range. From transport and towing speed requirement is very slow, the general provisions shall not exceed 15 - 20km/h, on the uneven road speed